The foam head is located inside the power unit. Air and liquid are mixed in the foam head to produce the foam, which is then pumped out through the hose to the treating tool. If needed, the entire foam head assembly may be disassembled for cleaning (see figure 11 page 20). Be careful not to over tighten outlet coupler when re-installing foam head. If over tightened, this fitting may break.
| Size | Unit Of Measure | Product Code | |
|---|---|---|---|
| 1 | Each | 645876 |
© 2020 ES OpCo USA LLC. All Rights Reserved. The Veseris mark, logo, and other identified trademarks are the property of ES OpCo USA LLC or its affiliates. All other trademarks not owned by ES OpCo USA LLC or its affiliates that appear in this communication are the property of their respective owners.
The information contained herein can be changed without notice and you should contact the manufacturer to confirm. Read and follow the Product Label and Safety Data Sheet ("SDS") for your health. All information is based on data obtained from the manufacturer or other recognized technical sources. ES OpCo USA LLC. provides this information "as is" and makes no representation or warranty, express, or implied, concerning the accuracy or sufficiency of the information and disclaims all implied warranties. ES OpCo USA LLC is not liable for any damages resulting from the use or non-use of the information and each ES OpCo USA LLC affiliate is responsible for its own actions. All transactions involving this Product(s) are subject to ES OpCo USA LLC Standard Terms and Conditions, available at https://www.veseris.com/sales-terms or upon request.
